Industries
Port firmware to new boards, and test changes on real hardware.
A new board can require firmware changes and fresh hardware testing, and a software change needs proof that it still runs on the hardware the robot ships with. Zerg AI builds firmware ports, hardware checks for software changes and service workflows for growth-stage makers of industrial, field and humanoid robots. Each port and check is verified on the boards and toolchains you name, against criteria agreed with you before the build.
We build with our own AI platform, which turns requirements into software and uses checks against your real systems to guide each next step.
Who this is for at a robot maker.
Firmware and embedded leads
Port firmware to each new board or processor with less hand work.
Software and test leads
Run every software change on the board the robot ships with, before release.
Deployment and service leads
Coordinate installs, service visits and spares, and turn faults into tickets.
Manufacturing and operations
Try a production change on a model before it reaches the live line.
Three first builds for robot makers.
Each first build is a proposal; the consultation settles its scope. It can also start from a deployment and service tracker per site or unit, or a digital twin of one line or cell for trying a production change before it reaches the live line.
Firmware porting to new hardware
- Today
- Robot and device firmware is ported by hand each time a board or processor changes.
- First build
- A port to one board you name, accepted when it passes the criteria your firmware lead sets on that board.
- Why here
- Each new board repeats work your firmware team has done once, and the release waits on it.
Software checks on real hardware
- Today
- Not every software change runs on the board the robot ships with before release.
- First build
- Checks that run the software changes your test lead names on the board the robot ships with, with a dated pass or fail record for each.
- Why here
- A change that skipped the shipping board has not been seen working on the robot.
Device alerts to service tickets
- Today
- Telemetry shows a fault, then someone opens a service ticket and looks up history by hand.
- First build
- Rules that turn device alerts into service tickets with unit history, parts and a suggested next step.
- Why here
- Each fielded robot that reports a fault needs a ticket, its unit history and the right part.
What robot makers ask before a first build.
Can we show what changed in the safety software?
Your safety process stays the record, and your safety lead decides what each change must carry. For the changes we build, each development run shows its task, files, checks and execution history, so your team can see what a software change did and which checks it passed. A re-check before release can be one of your review points.
Does it work on our hardware, or only in simulation?
On your hardware. The tests run on your boards and robots. Ports and software checks are built and verified against your hardware and toolchains.
What does a first port need from us?
One target board, its toolchain, and the criteria the port must pass on it. Your firmware lead sets those criteria, and we agree on them before we build.
Security & deployment
Built to run under your rules.
- You set the tools, execution limits and human review points
- Our development runs for the work we build are inspectable: task, files, checks and execution history
- Tests against acceptance criteria agreed with you before the build
- We do not currently hold SOC 2, ISO 27001, or any other third-party security certification. Ask us where the software would run, and what applies to your data, before work starts.
Free consultation
Start with one process. We’ll show you what AI can do with it.
In a free consultation we walk through how your team ports firmware, checks a software change or works a service ticket today. You leave with the first build we would recommend, if one fits.